Treated for the camera is very important because it is done without a camera without a good treatment will reduce the performance and reduce the faster your camera. so that the camera can be long-lived, always provide time for it. The process of cleaning the camera should be separate into 2 parts. That is part of the camera body and lens camera:
1. The tool in used :
Lens tissue
Lens cleaning fluid
Blower wind instrument or tool
Brush or brush
2. Camera body
First lap of the surface of the camera body easy to reach. Using a special cloth or lens cleaning cloth glasses. Because of the postwar, sweat patch at the hands of certain body. And that can cause corrosion (for the camera body of the iron), if not cleaned.
Usually there are corners that hard body reached by duster. And often dust small drop like that. For that use a blower and brush. Because the air from the blower can remove the dust. finishing touch with a dust mop with the rest of the dust-brush. Clean the mounting on the camera body with a towel. If still not clean. You can use a blower as cleaning of camera.
3. Camera lens
For the beginning, brush clean between the diaphragm ring and the focus ring brush. then clean the remaining dust using the blower, and continue with the clean lens. If plasticity is the point of dust can be removed using a blower. Suppose there is a fingerprint nempel, do not worry, provide clean cloth towel that has the soft contours. Then play dilap one direction slowly.
To filter using the camera enough cleaning tissue and fluid camera. take the lens tissue. after that teteskan little lens cleaning fluid. Way starting from the middle of dust and then rotate the lens until the lens edge. In this section you must be careful!
The last clear mounting the lens tissue or cloth. Clean until no visible dust. If you using the camera on the beach are strongly advised to clean the camera as soon as possible. Because the content is different from the coastal winds in the city. Air coastal salinity has a very high, which can cause the camera quickly erode.
4. Cover the camera
Put the camera in a plastic playpen soundproof. Add also on Silica gel. So that the fungus does not grow. Keep out of camphor and not stored in the cupboard. Try stored in the open in order not to damp quickly. for the camera to be stored a long time, remove the camera from the box once a week. about 1 hour to check whether the performance of the camera is still functioning properly. It also provides fresh air for the camera.
Tips treated the camera
Subscribe to:
Posts (Atom)
